977
edits
Changes
Jump to navigation
Jump to search
Mitsubishi OSE104 Serial Encoders (view source)
Revision as of 09:18, 10 January 2020
, 09:18, 10 January 2020initial page creation
== Overview ==
Proprietary serial encoders made by Mitsubishi meant to work with their MELDAS CNC controllers. It uses 2.5 Mbaud RS-422 to communicate with the controller. The protocol has been partially reverse engineered, and is supported by Rene Hopf's STMBL servo drive.
== Specifications ==
[https://s3.amazonaws.com/Icarus/DOCUMENTS/Mitsubishi_Manuals_1004.pdf#page=195 Page 195] (III-58 in the PDF) of the BNP-C3000C(ENG) manual details the specifications for different variants.
== Wiring Diagram ==
{| class="wikitable"
! Wire Color
! Circular Pin
! Mini-D Pin
! Function
|-
| green
| N
| (shield)
| (case GND)
|-
| gray
| L
| 17
| RQ-
|-
| orange
| K
| 7
| RQ+
|-
| yellow
| J
| 16
| SD-
|-
| red
| E
| 9
| (battery)
|-
| blue
| H
| 6
| SD+
|-
| black
| R
| 1,11
| 0V
|-
| white
| S
| 10,19,20
| +5V
|}
== Bill of Materials ==
MC34051 RS-422 transceiver chip.
== Online Resources ==
[https://s3.amazonaws.com/Icarus/DOCUMENTS/Mitsubishi_Manuals_1004.pdf Mitsubishi MELDAS MDS-C1 Series AC Servo/Spindle Specifications Manual]
[https://github.com/rene-dev/stmbl/blob/master/src/comps/encm.c stmbl/encm.c at master · rene-dev/stmbl]
Proprietary serial encoders made by Mitsubishi meant to work with their MELDAS CNC controllers. It uses 2.5 Mbaud RS-422 to communicate with the controller. The protocol has been partially reverse engineered, and is supported by Rene Hopf's STMBL servo drive.
== Specifications ==
[https://s3.amazonaws.com/Icarus/DOCUMENTS/Mitsubishi_Manuals_1004.pdf#page=195 Page 195] (III-58 in the PDF) of the BNP-C3000C(ENG) manual details the specifications for different variants.
== Wiring Diagram ==
{| class="wikitable"
! Wire Color
! Circular Pin
! Mini-D Pin
! Function
|-
| green
| N
| (shield)
| (case GND)
|-
| gray
| L
| 17
| RQ-
|-
| orange
| K
| 7
| RQ+
|-
| yellow
| J
| 16
| SD-
|-
| red
| E
| 9
| (battery)
|-
| blue
| H
| 6
| SD+
|-
| black
| R
| 1,11
| 0V
|-
| white
| S
| 10,19,20
| +5V
|}
== Bill of Materials ==
MC34051 RS-422 transceiver chip.
== Online Resources ==
[https://s3.amazonaws.com/Icarus/DOCUMENTS/Mitsubishi_Manuals_1004.pdf Mitsubishi MELDAS MDS-C1 Series AC Servo/Spindle Specifications Manual]
[https://github.com/rene-dev/stmbl/blob/master/src/comps/encm.c stmbl/encm.c at master · rene-dev/stmbl]