Leadshine CS-M Series Closed Loop Stepper Motors
Jump to navigation
Jump to search
Overview
Closed loop stepper motors made by Leadshine. Meant to be paired with their closed loop stepper drives.
Wiring Diagram
Power Connector
| Pin No | Wire Color | Function |
|---|---|---|
| 1 | blue | B- |
| 2 | red | A- |
| 3 | black | A+ |
| 4 | yellow | B+ |
Encoder Connector
| Pin No | Color | Function |
|---|---|---|
| 1 | black | A+ |
| 2 | red | VCC |
| 3 | white | GND |
| 11 | yellow | B+ |
| 12 | green | B- |
| 13 | blue | A- |
Replacement Parts
Power Connector
The motor power pigtail terminates in the following connector:
TE 172167-1 (housing)
TE 170360-1 (crimps)
The mating connector for the cable to the stepper drive:
TE 172159-1 (housing)
TE 170362-1 (crimps)
Encoder Connector
The motor pigtail terminates in a male DE15 connector with male thumbscrews, similar to this:
Assmann A-HDS 15 LL/Z (solder cup connector)
The mating connector for the cable to the stepper drive would have a female DE15 with female jackscrews, similar to this: