Changes

added parameter, error code, and Modbus information
Line 60: Line 60:  
| c43013f34c64291d8c4b2ebfa4cbab2a1f68ff27
 
| c43013f34c64291d8c4b2ebfa4cbab2a1f68ff27
 
|}
 
|}
 +
 +
== Parameters ==
 +
 +
* [https://cdn.automationdirect.com/static/manuals/gs20m/gs20m.pdf#page=89 Page 89] (4-3 in the PDF) has the parameter table
 +
* [https://cdn.automationdirect.com/static/manuals/gs20m/gs20m.pdf#page=136 Page 139] (4-50 in the PDF) gives detailed descriptions of the parameters
 +
 +
== Alarm Codes ==
 +
 +
* [https://cdn.automationdirect.com/static/manuals/gs20m/gs20m.pdf#page=384 Page 384] (6-8 in the PDF) list the warning codes
 +
* [https://cdn.automationdirect.com/static/manuals/gs20m/gs20m.pdf#page=401 Page 401] (6-25 in the PDF) list the fault codes
 +
 +
== Modbus control ==
 +
 +
* [https://cdn.automationdirect.com/static/manuals/gs20m/gs20m.pdf#page=359 Page 359] (5-1 in the PDF) is the chapter on "Serial Communications"
 +
 +
=== VFD parameters ===
 +
 +
{| class="wikitable"
 +
! Modbus Address
 +
! Parameter No.
 +
! Default Value
 +
! Required Value
 +
! Description
 +
|-
 +
| 0x0014
 +
| P00.20
 +
| 0: digital keypad
 +
| 1: RS-485 communication input
 +
| Master frequency command source
 +
|-
 +
| 0x0015
 +
| P00.21
 +
| 0: digital keypad
 +
| 2: RS-485 communication input
 +
| Operation command source
 +
|-
 +
| 0x0900
 +
| P09.00
 +
| 1
 +
| 1
 +
| Slave Address
 +
|-
 +
| 0x0901
 +
| P09.01
 +
| 9.6
 +
| 9.6
 +
| Baudrate
 +
|-
 +
| 0x0902
 +
| P09.02
 +
| 3: no warning, no fault, and continue operation
 +
| 2: fault and coast to stop
 +
| Communication Fault Handling
 +
|-
 +
| 0x0903
 +
| P09.03
 +
| 0.0
 +
| 2.0
 +
| Timeout Detection
 +
|-
 +
| 0x0904
 +
| P09.04
 +
| 15: 8, O, 1 (RTU)
 +
| 15: 8, O, 1 (RTU)
 +
| Communication Protocol
 +
|-
 +
| 0x0909
 +
| P09.09
 +
| 2.0
 +
| 2.0
 +
| Communication Response Delay
 +
|}
 +
 +
From [https://cdn.automationdirect.com/static/manuals/gs20m/gs20m.pdf#page=360 Page 360] (5-2 in the PDF)
 +
 +
=== Modbus registers ===
 +
 +
* [https://cdn.automationdirect.com/static/manuals/gs20m/gs20m.pdf#page=364 Page 364] (5-6 in the PDF) lists the status registers
    
== Bill of Materials ==
 
== Bill of Materials ==