ExtraTech PoleStar HP4 Controller
Overview
CNC motion controller with 4 integrated stepper drives that communicates with a VFD/LCD pendant, and a PC via Ethernet (or maybe also RS-232?). It was used by OEMs to provide controls on their machines. ExtraTech was bought by Multicam, who used their controllers, but supposedly the employees soon dispersed and Multicam doesn't have the ability to support repairing the controls anymore.
Bill of Materials
https://en.wikipedia.org/wiki/File:AMD_Elan_SC520-133AC.jpg
https://www.digipart.com/part/SC520-133AC
https://cdn.embeddedts.com/resource-attachments/ElanSC520-datasheet.pdf
https://www.digikey.com/en/products/detail/intel/EP1C12F324C8N/763639
CUI TS14-1212-43-BK-160-SCR-D (reset button)
Replacement Parts
Connectors
| Name | Part |
|---|---|
| E1,EK1 | TE 206705-1 |
| Drive 5-6 | Amphenol L17DAFRDA15S (similar) |
| L1 | TE 206306-1 |
| L2 | TE 206838-1 |
| Motor 1-4 | TE 211398-1 |
Fasteners
| Quantity | Type |
|---|---|
| 2 | M3-0.5x5mm Button Head Socket Cap Screws |
| 19 | M4-0.7x6mm Socket Head Cap Screws |
| 16 | M4-0.7x12mm Button Head Socket Cap Screws |
| 20 | M4-0.7x12mm Flat Head Socket Cap Screws |
- 10x M4-0.7x6mm Socket Head Cap Screws for fastening the main motherboard to the bottom of the chassis
- 1x M4-0.7x6mm Socket Head Cap Screws for fastening the "HDSP" board to the bottom of the chassis (if present)
- 8x M4-0.7x6mm Socket Head Cap Screws for fastening the stepper driver modules to the side of the chassis
- 1x M4-0.7x15mm stud for rectifier to mount to bottom of chassis
- 4x M2.5-0.45x6mm studs for internally mounting the "EK1" CPC connector to the side of the chassis
- 2x M3-0.5x5mm Button Head Socket Cap Screws for "AUX 1" blank
- 4x M4-0.7x12mm Button Head Socket Cap Screws for "E1" CPC connector (they protrude 8mm, could use 6mm long screws)
- 16x M4-0.7x12mm Flat Head Socket Cap Screws for "Motor 1-4" CPC connectors
- 4x M4-0.7x12mm Flat Head Socket Cap Screws for "L1" CPC connector
- 4x M4-0.7x12mm Button Head Socket Cap Screws for the "L2" CPC connector
- 8x M4-0.7x12mm Button Head Socket Cap Screws for fastening the side panels to the main chassis
Rectifier
Fans
NMB-MAT 7G05A73-1AZ MODEL FBA09A24H DC24V 0.17A Minebea-Matsushita Motor Corporation Made in China
Connected to a custom "HPEM" PCB that runs off +80VDC and provides regulated +24VDC power to the rest of the system.
Online Resources
PoleStar HP4 Controller and Motor Drivers - ExtraTech (Wayback Machine)
Hand-Held Serial Keypad - SKD80 - ExtraTech (Wayback Machine)
Motion Controller ExtraTech Corporation Products (Wayback Machine)
Software from ExtraTech Corporation (Wayback Machine)
ExtraTech Software - Machine Tools Suite (Wayback Machine)
Motion Controllers — ExtraTech Systems (newer Wayback Machine)
Peripherals — ExtraTech Systems (newer Wayback Machine)
Suite4 Install and Setup - InstallingMultiCamSuite4Software.pdf
Suite4 Operator Training - MultiCamSuite4OperationInstructions.pdf
Downloads - Advanced Machine Tools
Controller_Reference.pdf | DocDroid
MultiCAM-GCodes_and_MCodes_with_Software_Ports.pdf