Yaskawa SGD7S Series Servo Drives
Overview
Servo drives made by Yaskawa.
Specifications
Analog voltage/pulsetrain
Part numbers of the form SGD7S-xxxx00xxxxxxx:
- Page 46 (1-6 in the PDF) shows the model number scheme
- Page 57 (2-2 in the PDF) shows the per-model specifications
MECHATROLINK-III
Part numbers of the form SGD7S-xxxx30xxxxxxx:
For 200V models?:
- Page 42 (1-5 in the PDF) shows the model number scheme
- Page 52 (2-2 in the PDF) shows the per-model specifications
For 400V models?:
- Page 39 (1-6 in the PDF) shows the model number scheme
- Page 47 (2-2 in the PDF) shows the per-model specifications
EtherCat
Part numbers of the form SGD7S-xxxxA0xxxxxxx:
Wiring
Analog voltage/pulsetrain
- Page 102 (4-9 in the PDF) shows the wiring overview
- Page 118 (4-25 in the PDF) shows the "CN2" encoder connector pinout
- Page 128 (4-35 in the PDF) shows the "CN1" I/O signal connector pinout
MECHATROLINK-III
- Page 80 (4-9 in the PDF) shows the wiring overview
- Page 90 (4-19 in the PDF) shows the "CN2" encoder connector pinout
- Page 100 (4-29 in the PDF) shows the "CN1" I/O signal connector pinout
EtherCat
Software
Sigma-7 series (Software Downloads at bottom of page)
How to Install SigmaWin+ Version 7 USB Driver (TN.SIGMA7.01, Rev. 2, 2019-08-13) (mentions JZSP-CVS06-02-E "CN7" USB cable)
Page 245 (10-14 in the PDF) of the "Σ-7-Series AC Servo Drive Peripheral Device Selection Manual" has the USB cable part number.
NOTE: the SigmaWin+ V7.43 usage notes says that Windows 7 support was dropped, so you may need to use V7.42 or earlier (V7.40 is on the Wayback Machine)...
Filename | Size | MD5 | SHA1 | SHA256 | |
---|---|---|---|---|---|
SigmaWinPlus_Ver.7.43.zip | 638,877,488 bytes | d32f091d25f874883e66eebaa4c5ded5 | 6d97c906ae3901d5dc477a8328a1caa77120a740 | 8ad21a3036ed4dd3d0e83c36ba8dd12ee0694d5d1bd231c7c4be9c01bb00d5db | |
SigmaWinPlus_Ver.7.42.zip | 651,087,319 bytes | 6cb4c0142e2b4cd06e38f81d7e5d664b | 744e94d4f0a3d04b1bc94474afce11a2d292c64d | 597d1515788b96b7e0c077a072033043f1f1f0389af23c5ac001c93aabbfbaf7 | |
SigmaWinPlus_Ver.7.41.zip? | |||||
584,054,866 bytes | 2ba9722b4b542c1a96227ea22d7d01fb | b8e36fabc6f219ee35f61c0820d0cd780b8c91f2 | 424ee4c5be3678272d9bea4a06c8ef66666c3f989015b5cc5a439e6d4cc7e480 |
The software's installer may refuse to run claiming that Microsoft .NET Framework 4.5 is required. The software itself claims to require .NET Framework 4.6.2.
NOTE: The .NET Framework 4.8.1 installer doesn't support Windows 7!
Download .NET Framework 4.8.1 Web Installer (web downloading installer)
Download .NET Framework 4.8.1 Offline Installer (offline installer)
The .NET Framework 4.6.2 offline installer for Windows - Microsoft Support
Download Microsoft .NET Framework 4.5 from Official Microsoft Download Center (web downloading installer)
Interestingly, the installer ZIP file contains the "NDP462-KB3151800-x86-x64-AllOS-ENU.exe" Microsoft .NET Framework 4.6.2 offline installer inside of it (with a slightly different size / checksum?)...
On Windows 7, you may also need to update the trusted root certificates:
And also install the the "Update for Universal C Runtime in Windows":
Update for Universal C Runtime in Windows - Microsoft Support
Filename | Size | MD5 | SHA1 | SHA256 |
---|---|---|---|---|
NDP481-Web.exe | 1,459,232 bytes | f89c491569e9d0864661353d79192584 | 0227b77ec1575e6dfa8cc1b81c2152cabddc2d2b | a9e29f446af0db54a4f20de0749db25907fde06999c2e25e9eca52528dce3142 |
NDP481-x86-x64-AllOS-ENU.exe | 77,656,720 bytes | 618f5e5b80aa5f19860d6a8af4168e53 | fc675b7be72f0720e06075071940d9a23a714336 | fa7a3403087bfdcefd6c95dba4ff8ed2c37bcde465bef5e760d10c73cfc31d60 |
ndp462-kb3151800-x86-x64-allos-enu.exe | 62,000,832 bytes | 9fa38b5449fbb7cca1c4a622446f6110 | 053abdc5b421f50292149f7302f6a1a373cc2d5c | b4cbb4bc9a3983ec3be9f80447e0d619d15256a9ce66ff414ae6e3856705e237 |
dotNetFx45_Full_setup.exe | 1,005,568 bytes | 9e8253f0a993e53b4809dbd74b335227 | f6ba6f03c65c3996a258f58324a917463b2d6ff4 | e434828818f81e6e1f5955e84caec08662bd154a80b24a71a2eda530d8b2f66a |
NDP452-KB2901907-x86-x64-AllOS-ENU.exe | 69,999,448 bytes | ee01fc4110c73a8e5efc7cabda0f5ff7 | 89f86f9522dc7a8a965facce839abb790a285a63 | 6c2c589132e830a185c5f40f82042bee3022e721a216680bd9b3995ba86f3781 |
NOTE: the following URL must be copied and pasted, a hyperlink isn't possible due to the usage of square brackets in the URL conflicting with MediaWiki's syntax
https://www.yaskawa.com/delegate/getAttachment?documentId=SigmaWinPlus_Ver.7&cmd=documents&documentName=SigmaWin+%20Ver.%207.43%20Usage%20Notes%20[ReadMe%20file].pdf
SigmaWin+ Version 7 Usage Notes (SigmaWinPlus_Ver.7, Revision 7.43, January 2023)
https://www.yaskawa.com/delegate/getAttachment?documentId=SigmaWinPlus_Ver.7&cmd=documents&documentName=SigmaWin+%20Ver.%207.40%20Usage%20Notes%20[ReadMe%20file].pdf
SigmaWin+ Version 7 Usage Notes (SigmaWinPlus_Ver.7, Revision 7.42, June 2022)
https://docplayer.net/storage/117/227463549/1689756159/-j93SP0szxBOxVYGg4E12Q/227463549.pdf
SigmaWin+ Version 7 Usage Notes (SigmaWinPlus_Ver.7, Revision 7.40, September 2021)
How to Install SigmaWin+ Version 7 USB Driver (TN.SIGMA7.01, Revision 2, August 13th 2019)
Parameters
Analog voltage/pulsetrain
- Page 585 (14-2 in the PDF) shows the list of parameters
MECHATROLINK-III
For 200V models?:
- Page 484 (13-2 in the PDF) shows the list of parameters
For 400V models?:
- Page 496 (14-2 in the PDF) shows the list of parameters
EtherCat
- Page 580 (16-2 in the PDF) shows the list of parameters
Alarm Codes
Analog voltage/pulsetrain
- Page 489 (12-5 in the PDF) shows the list of alarm codes
MECHATROLINK-III
For 200V models?:
- Page 420 (12-5 in the PDF) shows the list of alarm codes
For 400V models?:
- Page 429 (13-5 in the PDF) shows the list of alarm codes
EtherCat
- Page 518 (15-5 in the PDF) shows the list of alarm codes
Replacement Parts
CN1 I/O Connector
Cable side connector:
- 3M 10150-3000PE (solder cup connector)
- 3M 10350-52F0-008 (backshell w/ hooks)
- 3M 10350-52A0-008 (backshell w/ screws)
Mates with the drive's PCB mounted connector:
3M 10250-59A3MB
CN2 Encoder Connector
Cable side connector:
Mates with the drive's PCB mounted connector:
CN3 Serial Communications Connector
Cable side connector:
- 3M 10114-3000PE (solder cup connector)
- 3M 10314-52A0-008 (backshell w/ screws)
Mates with the drive's PCB mounted connector:
Honda HDR-EC14LFDTN-SLD-PLUS
CN5 Analog Monitor Cable
TODO
CN7 USB Cable
JZSP-CVS06-02-E
Mates with the drive's PCB mounted connector:
CN8 Safety Functions Connector
TODO cable side connector
Mates with the drive's PCB mounted connector:
Online Resources
Σ-7-Series AC Servo Drive Peripheral Device Selection Manual (SIEP S800001 32K)
Σ-7-Series AC Servo Drive Peripheral Device Selection Manual (SIEP S800001 32K) (direct link)
Σ-7-Series AC Servo Drive Digital Operator Operating Manual (SIEP S800001 33F)
SGD7S EtherCAT with FSoE - Yaskawa
SGD7S MECHATROLINK-III - Yaskawa
Yaskawa: AC Servo System Σ7 400W Drive SGD7S-2R8A00A (source for stock photo)