JMC JASD Series Servo Drives

JMC JASD20002-20B stock photo

Overview

Chinese servo drives by JMC (Just Motion Control, aka Shenzhen Just Motion Control Electromachics Co.,Ltd.) that support both incremental ABZ/UVW encoders as well as Tamagawa 17-bit (and maybe 23-bit?) encoders.

Model Numbers

V1.3 manual:

• Page 14 (13 in the PDF) shows the servo drive model number scheme
• Page 16 (15 in the PDF) shows the servo motor model number scheme

V1.0 manual:

• Page 9 shows the servo drive model number scheme
• Page 11 shows the servo motor model number scheme

Wiring Diagram

V1.3 manual:

• Page 18 (17 in the PDF) shows an overview of the wiring
• Page 19 (18 in the PDF) shows how to wire single phase vs three phase
• Page 20 (19 in the PDF) shows the locations and descriptions of the various ports/terminals
• Page 21 (20 in the PDF) shows the CN1 "Control" connector pinout
• Page 25 (24 in the PDF) shows the CN2 "Encoder" connector pinout
• Page 27 (26 in the PDF) shows the CN3/CN4 "Communication" ports (CAN and RS-485)
• Page 28 (27 in the PDF) shows the CN5 "RS-232" connector
• Page 28 (27 in the PDF) shows the power terminal strip pinout
• Page 39 (38 in the PDF) shows example wiring for position mode control
• Page 45 (44 in the PDF) shows example wiring for velocity mode control
• Page 47 (46 in the PDF) shows example wiring for torque mode control

V1.0 manual:

• Page 12 shows the CN1 "I/O" connector pinout
• Page 14 shows the CN2 "Feedback" connector pinout
• Page 15 shows the CN3 "Communication 1" connector pinout (RS-232 and RS-485)
• Page 15 shows the CN4 "Communication 2" connector pinout (RS-485 only)
• Page 16 shows the power terminal strip pinout
• Page 24 shows example wiring for position mode control
• Page 26 shows example wiring for velocity mode control
• page 28 shows example wiring for torque mode control

Dimensions

V1.3 manual:

• page 30 (29 in the PDF) shows the dimensions

V1.0 manual:

• Page 17 shows the dimensions

Parameters

V1.3 manual:

• Page 67 (66 in the PDF) has the parameter table
• Page 82 (81 in the PDF) has the parameter descriptions

V1.0 manual:

• Page 33 has the parameter table
• Page 37 has the parameter descriptions

Replacement Parts

CN1 Control

• 3M 10150-3000PE (solder cup connector)
• 3M 10350-52F0-008 (backshell w/ hooks)
• 3M 10350-52A0-008 (backshell w/ screws)

CN2 Feedback

• 3M 10120-3000PE (solder cup connector)
• 3M 10320-52F0-008 (backshell w/ hooks)
• 3M 10320-52A0-008 (backshell w/ screws)

Online Resources

JMC JASD Series AC Servo Drives User's Manual (V1.3)

JMC JASD Series AC Servo Driver User Manual (V1.0)