Leadshine CS1-D507S Closed Loop Stepper Drive

Leadshine CS1-D507S

Leadshine CS1-D503S

Overview

Closed loop stepper drives made by Leadshine. They output/repeat encoder signals for the control system, making them appear as servo drives. It supports connecting to a PC via RS-232 for configuration/diagnostics.

Wiring Diagram

Page 8 (4 in the PDF) shows the names/locations of the various connectors, switches, and LEDs
Page 8 (4 in the PDF) shows the control connector
Page 8 (4 in the PDF) shows the control connector pinout
Page 10 (6 in the PDF) shows the encoder connector pinout
Page 10 (6 in the PDF) shows the motor output connector pinout
Page 10 (6 in the PDF) shows the power input connector pinout
Page 11 (7 in the PDF) shows the RS-232 connector pinout
Page 17 (13 in the PDF) shows example step/direction/enable/reset wiring
Page 18 (14 in the PDF) shows example alarm/feedback wiring

Switch Settings

Page 11 (7 in the PDF) gives an overview of the switches
Page 13 (9 in the PDF) shows the "S1" rotary switch settings
Page 14 (10 in the PDF) shows the "S2" DIP switch settings
Page 16 (12 in the PDF) shows the "S3" voltage level selector switch

Dimensions

Page 7 (3 in the PDF) shows the drive's dimensions

Fault Codes

Page 19 (15 in the PDF) shows the LED blink fault codes

Replacement Parts

RS-232 Cable

CABLE-PC-1

CABLE-PC-1 Tune Cable | Leadshine.com

Control Connector

Pluggable connector with push-in spring contacts:

Phoenix Contact 1790182 | DigiKey

To mate with the board mount jack:

Phoenix Contact 1786918 | DigiKey

Bill of Materials

Name	Marking	Part
U13	980 F280049PZS YFB-00A086W C4	Texas Instruments F280049PZS
U16	3PEAK 1584A BDosL	TP1564A
U20	Texas Instruments MA232EC 0AKG4 CLJD	Texas Instruments MAX232ECPW