Leadshine CS1-D507S Closed Loop Stepper Drive

Leadshine CS1-D507S

Leadshine CS1-D503S

Overview

Closed loop stepper drives made by Leadshine. They output/repeat encoder signals for the control system, making them appear as servo drives. It supports connecting to a PC via RS-232 for configuration/diagnostics.

Wiring Diagram

• Page 8 (4 in the PDF) shows the names/locations of the various connectors, switches, and LEDs
• Page 8 (4 in the PDF) shows the control connector
• Page 8 (4 in the PDF) shows the control connector pinout
• Page 10 (6 in the PDF) shows the encoder connector pinout
• Page 10 (6 in the PDF) shows the motor output connector pinout
• Page 10 (6 in the PDF) shows the power input connector pinout
• Page 11 (7 in the PDF) shows the RS-232 connector pinout
• Page 17 (13 in the PDF) shows example step/direction/enable/reset wiring
• Page 18 (14 in the PDF) shows example alarm/feedback wiring

Switch Settings

• Page 11 (7 in the PDF) gives an overview of the switches
• Page 13 (9 in the PDF) shows the "S1" rotary switch settings
• Page 14 (10 in the PDF) shows the "S2" DIP switch settings
• Page 16 (12 in the PDF) shows the "S3" voltage level selector switch

Dimensions

• Page 7 (3 in the PDF) shows the drive's dimensions

Fault Codes

• Page 19 (15 in the PDF) shows the LED blink fault codes

Replacement Parts

RS-232 Cable

CABLE-PC-1

CABLE-PC-1 Tune Cable | Leadshine.com

Online Resources

CS1-D507S Closed Loop Stepper Drive | Leadshine.com

CS1-D507S Closed Loop Stepper Drive | Leadshine.com

CS1-D503S Closed Loop Stepper Drive | Leadshine.com

CS1-D503S Closed Loop Stepper Drive | Leadshine.com

Leadshine CS1-D507S Closed Loop Stepper Drive User Manual (V1.1, Mar 2020)

Leadshine CS1-D503S Closed Loop Stepper Drive User Manual (V1.1, Mar 2020)

Leadshine CS1-D507S & CS1-D503S Closed Loop Stepper Drive User Manual (V1.01, Nov 2019)

Leadshine Motion Studio Software Quick Start (V0.1)