Difference between revisions of "Elmo SSA Series Brushed DC Servo Amplifiers"
(initial page creation) |
(initial page creation) |
||
| Line 1: | Line 1: | ||
| + | [[File:Elmo_SSA_6_100_eBay_next_day_automation_312081768147_Photo_5.jpg|thumb|Elmo SSA-6/100 on eBay]] | ||
| + | |||
== Overview == | == Overview == | ||
| Line 78: | Line 80: | ||
| (used for velocity mode IxR compensation, not used in current mode) | | (used for velocity mode IxR compensation, not used in current mode) | ||
|} | |} | ||
| + | |||
| + | == Photos == | ||
| + | |||
| + | === SSA-6/100 === | ||
| + | |||
| + | <gallery> | ||
| + | Elmo_SSA_6_100_eBay_next_day_automation_312081768147_Photo_1.jpg | ||
| + | Elmo_SSA_6_100_eBay_next_day_automation_312081768147_Photo_2.jpg | ||
| + | Elmo_SSA_6_100_eBay_next_day_automation_312081768147_Photo_3.jpg | ||
| + | Elmo_SSA_6_100_eBay_next_day_automation_312081768147_Photo_4.jpg | ||
| + | Elmo_SSA_6_100_eBay_next_day_automation_312081768147_Photo_5.jpg | ||
| + | Elmo_SSA_6_100_eBay_next_day_automation_312081768147_Photo_6.jpg | ||
| + | </gallery> | ||
| + | |||
| + | Taken from eBay seller [https://www.ebay.com/sch/next.day.automation/m.html next.day.automation]'s item eBay Item #312081768147 listing. | ||
== Online Resources == | == Online Resources == | ||
| Line 92: | Line 109: | ||
<del>[http://www.elmomc.com/support/manuals/MAN-SBAUG.pdf SBA Series Installation & Operating Manual Rev 8/06]</del> (original source -- remove/relocated) | <del>[http://www.elmomc.com/support/manuals/MAN-SBAUG.pdf SBA Series Installation & Operating Manual Rev 8/06]</del> (original source -- remove/relocated) | ||
| + | |||
| + | [https://www.ebay.com/itm/312081768147 ELMO SSA-6/100 Servo Amplifier, 20-100VDC 6/15A 20KHz, 100 x 65 x 30mm | eBay (seller next.day.automation)] | ||
Revision as of 03:20, 17 March 2019
Overview
Brushed DC servo amplifiers, supports current mode or tachometer feedback for velocity mode. The settings are set using resistors and capacitors across SIP sockets, though sometimes they are soldered to a monolithic PCB that is mated to the sockets instead.
Model Numbers
Page 7 in the "MAN_SSA_UG_EN_0698.pdf" (SSA Series manual) describes the model number scheme ("type designation").
Wiring Diagram
In the "MAN_SSA_UG_EN_0698.pdf" (SSA Series manual):
Page 14 shows the block diagram of the amplifier, showing where the external resistors/capacitors are being inserted into the circuitry.
Page 15 shows the physical layout of the user configurable resistors/capacitors, the potentiometers, and the connectors.
Page 16-17 describe the connector pinouts. More detailed information is in subsequent pages.
Resistor/Capacitor Settings
Default values shown for an SSA-8/100:
| Name | Value | Usage |
|---|---|---|
| C3 | [DNP] | (used for velocity mode, removed in current mode) |
| C11 | 10nF X7R | (used in current loop, set to standard value) |
| C12 | 10nF X7R | (used for velocity mode, not sure about current mode) |
| C41 | 10nF X7R | (used for velocity mode, not sure about current mode) |
| R40 | [DNP] | continuous current limit (set to rated max when not present) |
| R11 | [DNP] | (used for velocity mode, removed in current mode) |
| R6 | 33.2kΩ 1% | differential input current gain (set at 1.6) |
| R7 | 33.2kΩ 1% | differential input current gain (set at 1.6) |
| R12 | 475kΩ 1% | secondary feedback path gain (irrelevant if C3 not present) |
| R1 | [DNP] | single ended input current gain (set at 5.28) |
| R42 | 41.2kΩ 1% | peak current limit (set at 80% of rated) |
| R20 | 100kΩ 1% | (used in current loop, set to standard value) |
| R61 | [DNP] | (used for velocity mode IxR compensation, not used in current mode) |
Photos
SSA-6/100
Taken from eBay seller next.day.automation's item eBay Item #312081768147 listing.
Online Resources
SSA Series Installation & Operating Manual Rev 6/98 (direct PDF on Wayback Mach
SSA Series Installation & Operating Manual Rev 6/98 (Wayback Machine page with PDF frame)
SSA SERIES Installation & Operating Manual Rev 6/98 (original source -- remove/relocated)
SBA Series Installation & Operating Manual Rev 8/06
SBA Series Installation & Operating Manual Rev 8/06 (Wayback Machine page with PDF frame)
SBA Series Installation & Operating Manual Rev 8/06 (original source -- remove/relocated)