Difference between revisions of "Kollmorgen BDS4 Series Servo Drives"
Jump to navigation
Jump to search
(added power lug screw information) |
(added spade terminal maximum width) |
||
| Line 41: | Line 41: | ||
[https://www.mcmaster.com/90604A144/ Pan Head Combination Phillips/Slotted Screws, 18-8 Stainless Steel, 6-32 Thread Size, 1/4" Long | McMaster-Carr] | [https://www.mcmaster.com/90604A144/ Pan Head Combination Phillips/Slotted Screws, 18-8 Stainless Steel, 6-32 Thread Size, 1/4" Long | McMaster-Carr] | ||
| + | |||
| + | The spade/ring terminals must be less than ~8.6mm wide to fit between the barriers of the terminal block. | ||
== Online Resources == | == Online Resources == | ||
Revision as of 05:24, 16 November 2022
Overview
Analog servo drives made by Kollmorgen, they seem to use resolvers rather than encoders though they can be configured to output quadrature.
Specifications
Page 65 (D-5 in the PDF) shows the specifications.
Model Numbers
Page 51 (B-3 in the PDF) shows the "BDS4 Model Number Scheme".
Wiring Diagram
- Page 25 (2-8 in the PDF) shows the "C1 - Input/Output" connector pinout
- Page 27 (2-10 in the PDF) shows the "C2" resolver connector pinout
- Page 71 (E-2 in the PDF) shows the "32" simulated encoder output option pinout.
- Page 58 (C-1 in the PDF) has the mating connector part numbers for making cables.
Replacement Parts
Simulated Encoder Connector
8-pin housing:
Molex 0039012080 (would probably work equally well)
Crimps:
Molex 0039000039 (18-24 AWG, tin)
Molex 0039000047 (22-28 AWG, tin)
Power Lug Screws
Seemingly #6-32x1/4" combo screws, similar to these:
The spade/ring terminals must be less than ~8.6mm wide to fit between the barriers of the terminal block.
Online Resources
Kollmorgen BDS4 Series Installation and Setup Manual
Kollmorgen BDS4 Series Installation and Setup Manual (alternate link)