Difference between revisions of "Kollmorgen VFS5 Series Spindle Drives"
(added power lug screw information) |
|||
| Line 19: | Line 19: | ||
[https://www.mcmaster.com/91241A813/ Stainless Steel Pan Head Screws with Spring Lock Washer, M5 x 0.80 mm Thread, 12mm Long | McMaster-Carr] | [https://www.mcmaster.com/91241A813/ Stainless Steel Pan Head Screws with Spring Lock Washer, M5 x 0.80 mm Thread, 12mm Long | McMaster-Carr] | ||
| + | |||
| + | The spade/ring terminals must be less than ~16.1mm wide to fit between the barriers of the terminal block. | ||
== Online Resources == | == Online Resources == | ||
Revision as of 05:25, 16 November 2022
Overview
Spindle drive VFD with resolver/encoder feedback, meant for CNC applications where spindle orientation and speed regulation are important. It seems that it might be be a modified version of the BDS5 servo drive (the documentation would indicate they are very similar).
Wiring Diagram
- Page 10 shows the overall BDS5 to PSR module wiring diagram, with C1/C2/C3/C4/C6 pinouts
- Page 12 shows the C5 (RS-232/RS-485) connector wiring
- Page 13 shows the C2 (customer I/O) connector wiring
- Page 24 shows the C3 (resolver) connector wiring
Replacement Parts
Power Lug Screws
M5-0.8x12mm SEMS screws with captive washers, similar to these:
The spade/ring terminals must be less than ~16.1mm wide to fit between the barriers of the terminal block.
Online Resources
BDS5 Manual Addendum and VFS5 Spindle Drive Manual EN | Kollmorgen (download page)
Kollmorgen BDS5 Manual Addendum VFS-5 Spindle Drive Manual Old Number M94114 New Number MB 5007H
Kollmorgen MB 5007H (alternate source)
MotionLink Plus Software for BDS5 and VFS5 | Kollmorgen
https://www.naic.edu/~phil/mbeam/motor/motcontrol.pdf
KOLLMORGEN BDS4/5 – CNC_Principle_Repair
Cincinnati Parts 1267721-140 (source for image)
https://hiscnc.com/wp-content/uploads/2018/02/Circuit-Diagram-of-VFS5.pdf