Difference between revisions of "Huanyang HY Series VFDs"
(added more links) |
(added Modbus related parameters) |
||
Line 26: | Line 26: | ||
== Modbus control == | == Modbus control == | ||
+ | |||
+ | You must set the slave address to something valid (non-zero) and use some form of RTU mode instead of ASCII for most software stacks to communicate with the VFD: | ||
+ | |||
+ | {| class="wikitable" | ||
+ | ! Parameter | ||
+ | ! Default Value | ||
+ | ! Needed Value | ||
+ | ! Description | ||
+ | |- | ||
+ | | PD000 | ||
+ | | 1: parameter editing locked | ||
+ | | 0: parameter editing unlocked | ||
+ | | parameter editing lock | ||
+ | |- | ||
+ | | PD163 | ||
+ | | 0: invalid | ||
+ | | 1: address of 1 | ||
+ | | slave address | ||
+ | |- | ||
+ | | PD164 | ||
+ | | 1: 9,600 baud | ||
+ | | 1: 9,600 baud | ||
+ | | baud rate | ||
+ | |- | ||
+ | | PD165 | ||
+ | | 0: ASCII,8N1 | ||
+ | | 3: RTU,8N1 | ||
+ | | ASCII vs RTU,data bits,parity,stop bits | ||
+ | |} | ||
[http://www.etech.net.au/Huanyang/HY%20Series%20Inverter%2020100627.pdf#page=60 page 60] describes the Modbus protocol | [http://www.etech.net.au/Huanyang/HY%20Series%20Inverter%2020100627.pdf#page=60 page 60] describes the Modbus protocol |
Revision as of 01:52, 29 January 2024
Overview
Variable frequency drive for 3-phase spindle motors. They are found on eBay, Amazon, AliExpress, etc, typically marketed for Chinese water cooled spindles.
Model Numbers
Model | Input Power | Output Power |
---|---|---|
HY01D523B | 1PH/3PH 220VAC±20% 50Hz/60Hz | 3PH 0-220VAC 1.5kW 7A 0.5-400Hz |
HY02D211B | 3PH 110VAC±20% 50Hz±5Hz | 3PH 0-110VAC 2.2kW 20A 0.5-400Hz |
Page 4 shows the model number scheme
Wiring Diagram
Page 11 shows the description of the terminal blocks
Modbus control
You must set the slave address to something valid (non-zero) and use some form of RTU mode instead of ASCII for most software stacks to communicate with the VFD:
Parameter | Default Value | Needed Value | Description |
---|---|---|---|
PD000 | 1: parameter editing locked | 0: parameter editing unlocked | parameter editing lock |
PD163 | 0: invalid | 1: address of 1 | slave address |
PD164 | 1: 9,600 baud | 1: 9,600 baud | baud rate |
PD165 | 0: ASCII,8N1 | 3: RTU,8N1 | ASCII vs RTU,data bits,parity,stop bits |
page 60 describes the Modbus protocol
Online Resources
Huan Yang HY Series Inverter User Manual
https://www.exoror.com/datasheet/VFD.pdf
Produts | Hyria Electric Co, LTD (Wayback Machine)
Releases · GilchristT/SpindleTalker2
RobertOlechowski/Huanyang_VFD: All you have to know about Huanyang VFD
linuxcnc/src/hal/user_comps/huanyang-vfd at master · LinuxCNC/linuxcnc
machinekit-hal/src/hal/user_comps/huanyang-vfd at master · machinekit/machinekit-hal