Difference between revisions of "WEIDE B2 Series Servo Drives"

Revision as of 22:45, 17 February 2023

WEIDE WD15B2 series stock photo

WEIDE B2 series stock photo

Chinese servo drives supporting both incremental ABZ/UVW encoders as well as serial encoders.

Page 18 (15 in the PDF) shows an overview of the connectors
Page 20 (17 in the PDF) shows example wiring for position mode control
Page 21 (18 in the PDF) shows example wiring for velocity mode control
Page 22 (19 in the PDF) shows example wiring for torque mode control
Page 23 (20 in the PDF) shows the CN1 "Control" connector pinout
Page 29 (26 in the PDF) shows the CN2 "Incremental Encoder" connector pinout
Page 110 (107 in the PDF) shows the CN3 "Serial Encoder" and CN3/CN4 "Modbus" RS-485 connector pinouts

NOTE: CN3/CN4 have different pinouts between the serial and incremental encoder editions of the drives.

For the serial encoder / RS-485 jacks.

Cable side connector:

@@ Line 27: / Line 27: @@
 * [http://sevo.cn/upload/file_material/2021-04-14/1618365224b55d05ac7df1730c.pdf#page=10 Page 10] (7 in the PDF) shows the servo drive dimensions
+== Replacement Parts ==
+=== CN3/CN4 Connectors ===
+For the serial encoder / RS-485 jacks.
+Cable side connector:
+[https://www.digikey.com/en/products/detail/molex/0551000670/2405412 Molex 0551000670 | DigiKey]
+[https://www.amazon.com/gp/product/B09KPRPMPP/ GELRHONR IEEE 1394 SM-6P Plug, 55100-0670 Male Connector JZSP-CMP9-1-E 6-Pin Encoder Plug, Suitable for 54280-0609 Yaskawa Panasonic Servo CN3 Connector | Amazon]
 == Online Resources ==